Search
  1. ...
  2. Homepage
  3. Indoor climate
  4. Products
  5. Panel heating and surface cooling
  6. Panel heating and surface cooling
  7. x-net® C22 dry system wall heating

x-net® C22 dry system wall heating

Discover how easy it is to install.

x-net C22 dry system wall heating – the perfect wall heating for dry construction.

The perfect wall heating for dry construction. Panel heating is definitely the right choice when the priority is to keep system temperatures low while ensuring the optimum level of comfort in living areas or rooms that serve a similar purpose. Depending on the situation, wall heating is a great alternative or an ideal supplement to underfloor heating. It can be used when the floor coverings have a high level of thermal resistance (e.g. in the case of wooden flooring), if the existing floor coverings are to be retained during refurbishment, or if – for example – the underfloor heating in the bathroom is not powerful enough. The x-net C22 dry system wall heating is ideal for use as panel heating/surface cooling on all walls that provide firm support over the entire surface and feature panelling made of plasterboard, fibre-reinforced plasterboard, or other dry wall elements suitable for wall heating.

Highlights
System components
Documents & service

Advantages

x-net C22 dry system wall heating

  • Radiant heat
  • Low flow temperatures
  • Minimal pipe covering ensures a quick response
  • Can be easily combined with underfloor heating
  • The pipe dimension of 14 x 2 means that wall areas measuring up to 10 m² can be occupied by an individual heating circuit
  • Reliable venting due to the pipe dimension of 14 x 2
  • Single connection or connection to the heating circuit manifold in the Tichelmann system
  • Easy-to-handle MKV composite pipe that is 100 % oxygen diffusion-proof
  • Pipe run of the fully installed wall heating can be made visible with x-net thermofoil
  • Drywall construction method without any drying times, no moisture in the structure

x-net controls

Further information about the x-net controls from Kermi

Find out more

x-net C22 dry system wall heating

The 25 mm drywall panels are installed between laths and fixed in place with adhesive mortar. Adhesive mortar is applied to the entire surface to ensure contact with all the wall panelling. The batten structure is used to secure the wall panelling.

The rigid foam insulation made of polystyrene can be quickly and easily cut to size with the x-net cutting knife.

The marking groove on the panel is used for positioning the heat-conducting plate. Any additional pipe ducts that may be required can be created accurately using the x-net heat-cutter.

The length of the heat-conducting plate can be adjusted by making a simple, burr-free break at the pre-punched breaking points.

The special Ω contour ensures high pipe retention strength and optimal heat transfer through the x-net heat-conducting plate to the wall structure in front.

Commercially available drywall boards can be used for short construction times and to reduce the amount of humidity entering the building.

x-net MKV composite pipe

x-net C22 wall heating plaster system, MKV composite pipe

Printed marks on the pipe indicate the remaining length and pipe length already used, allowing optimal utilisation of pipe coils.

x-net C22 wall heating plaster system, MKV composite pipe

Installation-friendly MKV composite pipe with high flexibility and pipe bends that have no spring-back forces.

x-net C22 wall heating plaster system, MKV composite pipe

Extensive range of press-on and screw connectors.

x-net wall heating connection

x-net C21 wall heating plaster system, wall heating connection.

An extensive range of fittings allows single connections or Tichelmann connections to be made with ease.

x-net C21 wall heating plaster system, wall heating connection.

Pipe bends installed “in loops” on the panel do not make contact with the screed slab. In the case of thin-layered floor structures, this prevents sound transmission and mechanical damage to the pipe.

x-net C21 wall heating plaster system, wall heating connection.

x-net wall heating can be optimally combined with underfloor heating and connected to the same manifold.

Accessories

x-net unrolling unit

Documents

Pricelist
Brochures
Datasheet
Instruction
Technical information
Declaration of performance

Product video

For new and old buildings. Comfortable heat from the wall delivered in no time.

  • The pipe dimension of 14 x 2.0 mm means that wall areas measuring up to 10 m² can be occupied by an individual heating circuit
  • Reliable venting due to the pipe dimension of 14 x 2.0 mm
  • Single connection or connection to the heating circuit manifold in the Tichelmann system
  • Easy-to-handle MKV composite pipe that is 100 % oxygen diffusion-proof
  • Drywall construction method without any drying times, no moisture in the structure

x-net unrolling unit

Lay your ventilation and underfloor heating pipes faster, smarter, and more effectively. The handy unroller for both types of pipe!

  • Reduces installation work and helps keep the construction site tidy
  • Ventilation and underfloor heating pipes can be laid by a single worker
  • No tension or twisting during unrolling
  • Can be assembled and disassembled in just a few simple steps without the need for tools

Images

We are proud to present our latest images, which you can view here.

Go to download centre

Videos

All Kermi product and installation videos are also available for you to watch on YouTube whenever you like.

Find out more now

Customer service

x-net panel heating and surface cooling

Onlineformular Flächenheizung und -kühlung

Quotation and planning service for x-net panel heating and surface cooling

Are you looking for a Kermi specialist partner near you?

With our search, you can find a specialist partner near you that can assist you with consultation plus exhibition, with planning or with consultation and installation.